Our Gunning etching presses are designed to print both relief and intaglio with exceptional results. For relief printing, we use our custom runners alongside a registration system with pins and tabs, developed specifically to work seamlessly with our presses and others!
A Quick Guide to Our Gunning Etching Press Runners
Our printing runners are designed to make switching between relief and intaglio printing simple, accurate, and beautifully controlled. Available in a range of thicknesses from 2mm to 80mm, they sit on top of your press bed and are secured in place on all Gunning Etching Presses with our unique runner locking system. Once set up, your top roller drops down directly onto the runners, allowing for smooth and even pressure as your paper kisses the ink.
When using runners, the printing plate should always sit slightly lower than the height of the runners. This leaves space for your printing paper and packing layers to bridge the gap to the top roller. Fine-tuning this pressure is part of what gives you full control—sometimes simply removing or adding a single sheet of packing can completely change the result of a print.
If you experience what we call “slip”—where your paper skids slightly on the plate—it usually points to one of two things: either your ink is too runny, or you’re using a roller that’s too soft to apply your ink. A hard shore roller helps apply just the right amount of ink (as long as your ink isn’t too loose!). On warmer days, adding magnesium carbonate to your ink can help stiffen it for better control.
With our 4mm runners, you can print any plate up to approximately 4mm thick. For instance, hessian-backed lino is typically 3.2mm, and easy-cut lino around 3mm. To make up the difference between your plate and the runner height, simply add packing paper—typically around 280gsm. We recommend Southbank Smooth or Bread & Butter for this.
When making multi-plate or reduction prints, we suggest using the 8mm runners. For extra stability and accuracy, double-side your plate to a sheet of MDF or hardboard, and use Ironbridge registration pins and tape to secure your paper and plate together. This ensures they move as one unit through the press, giving you excellent registration and consistent results.
In the studio, I personally use the 4mm, 8mm, and 25mm thick runners. The 25mm runners are perfect for printing all my letterpress and woodblock work—they give me the clearance I need and the pressure I want. Having a variety of runner thicknesses to hand makes it quick and easy to switch between different types of printing without adjusting your press bed each time.
Our press system, developed through years of hands-on printmaking, provides a clean, efficient, and adaptable solution for both relief and intaglio printing.
You can purchase runners directly from us [insert link here].
Thank you for reading, and happy printmaking!
All the best,
Jenny Mason-Gunning
Tag us using:
@IronbridgePrintmakers @GunningEtchingPress
#GunningEtchingPresses #GunningEtchingPress #JennyGunningPrintmaker







